Sanqiaohui Single-Point Liquid level switch sensor for Franklin fueling systems
SANQIAOHUI Single-Point Liquid level switch sensor detects and monitors the fuel level in storage tanks or pipelines. It triggers specific actions, starting or stopping pumps, activating alarms, or shutting down systems to prevent overflow, leaks, or dry running.
A float rises and falls with the fuel level.movement triggers a mechanical or magnetic switch to indicate the fuel level.
Detects high and low levels to avoid overfilling or running empty.Provides input to automatic tank gauging systems for real-time monitoring.
Identifies fuel leaks by detecting unexpected level changes.
Helps ensure compliance with environmental and safety regulations.
Automatically turns pumps on or off based on fuel levels.Prevents damage to pumps by avoiding dry running.
Activates alarms or shuts down systems if the fuel level exceeds a safe threshold.Prevents spillage and fuel waste.
Identifies water accumulation in fuel storage tanks, which can lead to contamination or equipment damage.
Features：
Single-Point Level Switch units are ideal for use in oils and water.
With a compact-sized float, slosh shield and weighted collar, the liquid level detection for a wide variety of applications.
Suspend in stand pipes or sumps for leak detection duty or drop into wells for ground-water monitoring.
Supplied with 7.62 m of waterproof cable.
It detects hydrocarbons and water as low as 3/4" from the bottom of a tank or sump.An integral slosh shield guards the float from debris;
Material:Stainless Steel 304
Operating Temperature: -40℃~+100℃
Switch Type:SPST (20 VA) Normally Closed (Non-Reversible)
Max. Pressure: 150PSI
Float Diameter：1” Thread
Electrical Termination:22 AWG, (2) Conductor PVC Cable 7.62m
- Use pressure and flow sensors to monitor fuel movement through pipelines.
- Detect changes in pressure, flow rate, or volume that suggest a leak.
- Can employ hydrostatic or electronic line leak detection methods.