SS2/SS3 Float Switch L Shape Safe-T-Switch for HVAC Drain Pan Condensate Outlet, AC Pan Float Switch Detects Clogged AC Condensate Drain and Shut Off System
SAFETY - SS2 Float Switch L Shape Overflow Shut-Off is a must-have for your HVAC and refrigeration needs. It detects clogged air conditioning drains and automatically shuts down the system to prevent water from overflowing and damaging floors, walls and ceilings.
EASY INSTALLATION - SS2 Float Switch includes 3/4" adapter, busing, cap&switch. it can be installed on the auxiliary drain outlet of primary pan by using the3/4 adaptor, The switch can be connected to either the VCC or thermostat wires. You can use PTEE tape for the adaptor connecting to get high watertight.
ADVANCED TECHNOLOGY - SS2 Float Switches are made of advanced technology with stable performance.
EASY TO CLEAN - The standard 3/4" adapter easy to removed. The switch removed for cleaning and servicing condensate drain lines.

Edgewater Parts W10467289, AP6021886, PS11755214 Washer Temperature Sensor Compatible With Whirlpool Washer
W10467289 Washer Temperature Sensor Replacement for Whirlpool

The Level switch probe electrode is engineered to register a change in electrical characteristics (such as resistance or capacitance) almost instantaneously when the liquid contacts the electrode surface.

The FLS-010 Flow Switch is a reliable in-line piston style sensor with PA (PBT) housing, a Polypropylene piston, and a Stainless Steel spring.
The Flow Switch provides an accurate yet cost eective solution for set point ow monitoring (ow or no-ow). Featuring a simple make or break signal using reed switch technology, and can be mounted vertically or horizontally.

The ice maker market is poised for continued growth, driven by the expanding food service industry, increasing demand for ice in healthcare applications.

Data Centre Temperature and Humidity Monitoring System is used to measure critical parameters like Temperature and Humidity. Data Center Temperature Sensors Constantly monitoring the temperature across your data center is vital for identifying the formation of hot spots that can damage infrastructure or understanding if you are overcooling racks and wasting money and energy.
Humidity plays an important role in data centers and can have a negative impact on your infrastructure if not monitored properly. When the inside of a data center is too dry, a buildup of static electricity can occur.Humidity monitoring also helps you correctly adjust set points to avoid wasting energy.
ASHRAE guidelines suggest that the relative humidity in a data center should measure between 40%-60%. Unlike temperature, humidity does not vary as fast, therefore needing fewer sensors. The standard ratio is one humidity sensor deployed for every five racks and placed in the front of the rack.

Level Switch High High and Level Switch Low are installed in a mixing tank.

1/2NPT -50℃~+450℃ PT100 Thermocouples Temperature sensor

3/8NPT,1/2NPT,M18*1.5mm Thread，SS304,PTFE，Voltage change signal，Maximum water pressure 10Bar

Sanqiaohui I2C Pressure sensor G1/8 thread，Range 1.75MPa，I2C Digital signal output，3.3vdc